Backup generator didn't start: what to check
A standby generator can fail for several reasons, including controller settings, battery, fuel or an alarm. Observe only an accessible display as permitted by the owner manual; leave internal checks and transfer-switch work to qualified personnel. Call 833-877-1717.
RepairNowUSA editorial review · Last substantively reviewed October 13, 2026 · Review standards

Safety first: carbon monoxide and backfeeding
- Use portable generators outdoors only, at least 20 feet from doors, windows and vents, with exhaust directed away from buildings. Never use one in a garage or enclosed space. Permanently installed standby systems require manufacturer-specific siting and qualified installation.
- Make sure CO alarms in the building are working.
- Never plug a generator into a wall outlet. "Backfeeding" can energize utility lines and kill line workers. Generators must be connected through a transfer switch or approved interlock.
- Let a generator cool before refueling.
Standby generator: the four common causes
- Not in auto mode: after maintenance or testing, the controller is often left in "Off" or "Manual". Check the display.
- Battery: a starting-battery or charger fault is one possible cause. Record an accessible alarm display without touching terminals; ask a qualified service provider to inspect it.
- Fuel: natural gas valve closed or utility gas interrupted; propane or diesel tank low; diesel that has gone bad or gelled in cold weather.
- Active alarm: low oil, overcrank, overspeed or high temperature alarms lock the unit out. Record an accessible display and leave fault investigation or reset decisions to qualified service personnel.
Running but the building has no power
- The automatic transfer switch may not have transferred. Check its display or indicator lights.
- The generator's output breaker may be tripped.
- Only some circuits are on generator power by design. Check which loads are on the emergency panel.
- Do not operate a transfer switch manually unless you have been trained on that equipment.
If it started and then shut down
- Overload: too many loads came on at once, especially large motors or HVAC.
- Low oil or high temperature: check oil level only with the unit off and cool.
- Fuel starvation under load.
- Blocked air intake or exhaust, including snow or debris around the enclosure.
Protect what matters while you wait
- Prioritize life-safety and medical loads. If someone depends on powered medical equipment, have a backup plan and call 911 if their safety is at risk.
- Keep refrigerators and freezers closed.
- Plan for sump pumps in wet weather.
- Turn off sensitive equipment to protect it when power returns.
Maintenance that prevents the next failure
Standby generators need regular exercise runs, periodic load testing, battery replacement on schedule, oil and filter service, and fuel management. Commercial and healthcare facilities often have code-required testing schedules. Keep a log.
When you call 833-877-1717, give the generator brand, size, fuel type and any alarm on the display. RepairNowUSA looks for a participating independent generator or electrical provider; the provider confirms timing and price with you.
How RepairNowUSA can help
Call 833-877-1717 and describe what is happening and the property ZIP code. RepairNowUSA looks for a participating independent provider for that kind of work in your area and connects you if one is available. The provider confirms timing, scope and price with you and does the work. Availability and response times vary and are not guaranteed.
Call 833-877-1717Common questions
Why did my standby generator not start during the outage?
Possible causes include a controller left out of automatic mode, a weak starting battery, a fuel problem, or an active alarm locking the unit out.
Is it safe to run a portable generator in the garage with the door open?
No. Carbon monoxide can build up to deadly levels in garages and enclosed spaces even with doors open. Use portable generators outdoors only, at least 20 feet from doors, windows and vents, with exhaust directed away from buildings. Never use one in a garage or enclosed space. Permanently installed standby systems require manufacturer-specific siting and qualified installation.
Can I plug my generator into a wall outlet?
No. That backfeeds the building wiring and can energize utility lines, endangering line workers. Use a transfer switch or approved interlock installed by an electrician.
How often should a standby generator be tested?
Manufacturers commonly recommend regular exercise runs and periodic service. Commercial and healthcare facilities may have code-required testing. Follow the manufacturer's schedule and your local requirements.
Can I call any time?
Yes. You can call 833-877-1717 at any time, including nights, weekends and holidays. Whether an independent provider can come out right away depends on your ZIP code, the time and provider capacity, so availability is not guaranteed.
Authoritative references
These public sources give general safety context. They do not replace an on-site evaluation, and RepairNowUSA does not perform the work.